Posts Tagged ‘yProxy’

yProxy Video Tutorials

Wednesday, November 18th, 2009

I recorded some video tutorials. I hope that these short videos will answer your questions.

The first video tutorial shows you what yEnc messages look like in your newsreader if your newsreader doesn’t natively support yEnc. This video will help you recognize yEnc messages so you know if you need a yEnc Decoder like yProxy.

Continue reading “yProxy Video Tutorials” »

Other uses for a yEnc decoder proxy

Wednesday, October 29th, 2008

A properly written yEnc decoder proxy should be a true, unblocking TCP proxy underneath.  What this means is that even if the proxy is waiting for a response from a server, you can continue to send it data.  In addition, if it is waiting for the user to send it data, it will still receive data from the server.

This allows you to use the proxy as a raw TCP proxy to route other TCP traffic.  yProxy can be used as a raw TCP proxy in such a manner simply by disabling the “yEnc Decode” feature, which turns it into a pure TCP proxy.

yProxy as a web proxy

For example, try the following setup in yProxy:

Be sure to set the port numbers also, and click the Start button to start the proxy server.  Then try entering this URL in your browser address bar:


You’ll see Google’s homepage show up.  What you’ve done is load Google’s homepage through the proxy.  Actually, you’ve got a little bit more work to do if you want to keep going through the proxy at this point because anything you click on goes to a address instead of “localhost”, but you’ve gotten the point that yProxy can be a down and dirty proxy for redirecting TCP traffic.

yProxy’s TCP proxy options would be best used for other types of TCP traffic like email or FTP, where the client doesn’t try to make connections to other domains.

yProxy as a remote web proxy and port obfuscator

The above example doesn’t really make much practical sense, but imagine that your school or work attempts to blocks all web traffic by blocking all traffic on outgoing port 80, but they do allow SSH traffic over port 22.  Leave yProxy running at your home with the following configuration:

Disable yProxy’s ”Run Locally Only” option and, as before, click Start to start yProxy.

Then from your school or work computer enter the following URL into your browser’s address bar:

You’ve just loaded Google from your home over port 22.

Note: I cheated in my example. is actually a private IP address.  You’ll need type your public IP address into your web browser.  If you’re behind a NAT router at home, you’ll have to find out what your public IP address is and enable port forwarding or plug your computer into the DMZ port.  To find your public IP address, go to

yProxy as a remote FTP proxy

What if your friend is running an FTP server, but for security purposes, he only allows you to connect from your home IP address.  You’re going to be on the road though, and you still need to access the FTP server, but you don’t want to bother your friend to change his server’s configuration.

Use the following configuration for yProxy:

Well, FTP uses a second port for data, so you’ll need another instance of yProxy running to actually download anything:

Again, you need to turn off the “Run Locally Only” option for yProxy and press the Start button to start the proxy servers.

Now, you can enter this address into your FTP client or web browser:

Your computer at home is connecting to your friend’s FTP server, and you’re connecting to your computer at home, so as far as your friend’s server is concerned, you’re still at home.

yProxy is more than just a yEnc decoder

There are other legitimate uses for a TCP proxy.  Please let me know what you come up with.

yProxy stands apart from other yEnc decoders.  yProxy is a true TCP proxy underneath.  Have fun.